header_lavorazione_tubo_en.jpg

Panamac TR 130-TR200-TR 300 orbital cutting heads feature:

  • Hydraulic pipe lock clamp, with bracing clamping inserts to hold the pipe in place and quickly interchangeable.
  • Tool drive with 2 or 4 slides, completely mechanical (patented), controlled by a brushless motor, which allows full stroke management, forward movement, increments and decrements during cutting, via electric microprocessor with controls and Touch-Screen display.

 

TR130 Range of the machine
Thickness
Cutting length
Diam min 40m – diam. Max 130 mm
Max. 6 mm for the cutting with disc – max 45 mm for the cutting with tools
Min 10 mm – max 3000 mm
TR200 Range of the machine
Thickness
Cutting length
Diam min 70 mm – diam. Max 200 mm
Max. 7 mm for the cutting with disc – max 45 mm for the cutting with tools
Min 10 mm – max 3000mm
TR300 Range of the machine
Thickness
Cutting length
Diam min 70 mm – diam. Max 210 mm
Max. 6 mm for the cutting with disc – max 45 mm for the cutting with tools
Min 10 mm – max 3000mm

PANAMAC TR130-TR200-TR300 cutting heads, on demand, can be equipped with a set of special devices, such as:

  • PIPE BLOWING DEVICE that allows perfect cleaning of residues.
  • LIMIT STOP UNIT pneumatically operated and with manual setting or, on request, an electronic axis which allows the operator to set various lengths on the same bar, in order to streamline production and minimising bar waste (heads/tails). For the same purpose, 2 limit stop units with manual setting can be installed.
  • Electronic PUSHER for bar movement.
  • SOFTWARE to calculate the production of pieces and size desired, obtainable in a rod with minimal scrap.
  • PC station with ETHERNET network connection to receive data from various offices.
  • AUTOMATIC LOADER designed and manufactured to allow an adequate system of automatic interlocking, quiet and efficient, because of its standalone feed system. The modularity of construction also allows the operator to optimise it depending on the required lengths.
Several cutting line versions are available:

D for cutting by means of continuous rim discs that allow a fast cutting sequence with no swarf.
U or cutting with the use of cutting tools that remove any swarf. The system performs high quality cuts in terms of finish, flatness and perpendicularity.
Both for cutting and inner and outer beveling of the pipe.

2 SLIDES with 2 slides to cut the pipe only
4 SLIDES with 4 slides for cutting and beveling

 

Panamac is also…